New sediment and carbon filters

How Often Should You Replace Reverse Osmosis Filters?

A reverse osmosis (RO) system protects its membrane with pre-filters and polishes the water with a post-filter. When filters are overdue, water quality drops and the membrane can be damaged – a much more expensive part to replace.

A typical replacement schedule

  • Sediment pre-filter: every 6–12 months.
  • Carbon pre-filters (GAC and carbon block): every 6–12 months. They protect the membrane from chlorine.
  • RO membrane: every 2–3 years, depending on water quality and use.
  • Post carbon / remineralization / alkaline filter: about every 12 months.

Homes with high sediment, high TDS or heavy water use may need shorter intervals. Always follow your system manufacturer’s recommendations.

Signs it is time for service

  • The water tastes or smells different.
  • The faucet flow is slower or the tank takes longer to fill.
  • A TDS meter shows the purified water reading rising compared with when the system was new.
  • The system runs or drains more than usual.

Check it yourself with a TDS meter

Measure your tap water and your RO water. A healthy RO system usually removes most dissolved solids. If the RO reading keeps climbing, the membrane or filters need attention. Our digital TDS tester makes this a 10-second check.

Let us do it for you

Our maintenance service includes the filters, the replacement and a water quality check. Prefer to do it yourself? See our accessories or call/WhatsApp (786) 835-1377.

Regresar al blog